Electric Fireplace Wall Hanging Ideas

In contrast to traditional wood or gas fireplaces wall-mount electric fireplaces can be hung straight out of the box. These electric fireplaces are an excellent way to add ambience to your home without the need for remodeling or venting.

They are usually heavy and require careful installation. Follow these steps to install your new electric fire correctly.

1. Connect the Brackets

A wall-mounted or recessed fireplace instantly improves the look of any room. This is a great option for those who don't have fireplaces or reside in apartments.

First, you must decide where to place your new electric fireplace. You should select a spot that isn't prone to moisture and at least just a few feet from furniture and drapes. Mark the wall with layout marks to mark the top and bottom plates for the fireplace frame.

Make use of a drill or another tool to make exploratory holes in the wall. Examine for studs with a stud-detector and mark the drywall with the location of the fireplace mounting brackets. Then, you can build the wall or patch and paint the drywall to prepare it for fireplace installation.

Depending on your chosen wall-mounted fire, you may either need to fit the firebox and screen as one unit or separate them using the use of a wall bracket. If you aren't sure of your ability to finish this project, hire a general contractor or an experienced carpenter.

You can find a template included with most electric fireplaces. However, you should also keep a level in your pocket and pencil to mark the exact spot where the wall brackets will be installed. Before drilling, make use of the template to verify that the fireplace's power cable can reach from the installation site to an outlet near by to plug it in.

Install the drywall as smooth and flush as you can to give the fireplace a sleek appearance. Add trim to the bottom edge, and then paint, sand and then finish the frame.

You'll need to insert the hooks or slots on the back of many electric fireplaces mounted on walls into the brackets for mounting. Make sure to make sure that the slots or hooks are aligned prior to connecting the fire brackets. Once the fire is installed you can then add additional elements like driftwood logs crystal embers, or decorative rocks.

2. Check the Bottom Bracket

The space that is above a fireplace, mantel or chimney breast is the ideal spot to hang artwork. However, there is a fine line between an artistic arrangement and one that detracts from the overall appearance of the fireplace design.

A general rule is that a photo should cover 80percent of the length of the mantel or fireplace it sits over. This will keep it proportionate and make it look good on the wall. Other decorative ornaments and accessories placed on the mantel can also influence this size & proportional guideline.

If you're planning to hang a photo above your electric fireplace, it's crucial that the frame is made of glass or another material that can withstand high temperatures. If you're not sure whether the frame is suitable, you can test the frame with a heat sensitive cloth to determine if it is suitable for this application.

The most common issue with displaying pictures over a fireplace is the risk of causing damage to the artwork due to smoke or other heat sources. This is not an issue with gas or wood-powered fireplace. However when you are planning to install an electric wall fireplace, it's important to check the instructions provided by the manufacturer.

Most electrical fires have a mounting bracket that can be fixed to the Wall Mounted Electric Fires using hanging screws or a wall-mounted fixing system. It is recommended that you make an exploratory hole in an area that is distinct from the wall fire place electric prior installing your electric fire. Then, you can use a cable finder and pipe to check that there aren't any cables or pipes within the vicinity of the location you've chosen to mount it.

If they are, you can then decide to put your fire over the electrical socket or move it to a different spot. If you choose to move it to a different location you'll need to make sure that the power cable reach from the fire to the electrical socket. this is crucial for older homes or homes with solid walls. If not, your electric fire won't perform as it should. Certain models come with a template that shows you the locations to drill holes to make the holes, while others require a spirit-level and pencil to mark the appropriate locations on your wall.

3. Connect the Power Cord

If you've put in a recessed electric fireplace, you might need to move the plug socket from the wall to behind the unit. This can give it a cleaner appearance. Test the fireplace first to make sure it is operating properly.

A third popular way to mount an electric fireplaces wall mounted fireplace is to frame the space and then build it into the wall. This gives it a finished, traditional look and allows you to build an additional mantel. The owner's guide for your model will provide information on framing, wiring and the best wall mounted electric fires way to secure the fire place.

You can mark the location of your electric fireplace on the wall with the help of a pencil or marker. Use a carpenter's level to ensure that the installation area is flat and level. You can use a studfinder to mark the location so that you know that you're drilling in a secure area.

Once you've marked the installation location, use your electric drill to make holes for the bracket screws or hanging screws. Follow the directions in the owner's manual for this step. This is especially important if you're putting the fireplace in the drywall. If you're unsure of how to do this you can always consult an expert to take care of the installation for you.

A cable organizer kit can be used to conceal power cords. These kits typically include sleeves, clips or boxes to bundle cables. You can make use of wire snakes or fish tape to guide the cords. If you don't want to cut through your drywall or drywall, you can install an electric bridge kit to make cleaner and safer connections.

You can also disguise cords by using paintable wire covers, or by attaching them to the wall. Keep the cover or tacks far away from sources of heat. This will shield the cord from being damaged and will also prevent accidental contact.

4. Connect the adapter

A wall-mounted electric fireplace is a great option for home renovations or for those who don't have the space or funds to put in a gas fireplace. They are easy to hang and can be used straight from the box. They are a wonderful alternative for those who are looking for a chic modern touch or the warmth the fire can bring. These units can be hung on any wall like art, and they are electric and have fan-powered heating.

It's a good idea to create an inventory of the tools and equipment you'll require prior to starting the installation process. There are detailed instructions on how to install an electric fire in the user manual. Some models require that you screw brackets directly into the wall, while others could have an installation plate that slides into slots or hooks on the brackets. If you're installing a recessed unit it is important to ensure that all combustible substances are removed from around the installation area. As a rule, you should keep these materials at a minimum of 3 feet away from the front of the fireplace.

After you have checked all parts, plug in your electric fire and verify that it's working. This is a crucial step, as it will ensure the flame effect screen and heater function as intended. This will also provide you with an idea of how the product will appear in its final configuration.

Cover the cord after you are sure that it's working correctly. This will keep the final product neat. It is possible to achieve this by installing a new outlet that has a cord that can be hidden behind the unit. This will give a seamless finish to your fireplace.